Description
The SS Thread Bar is a high-strength, fully threaded fastening solution manufactured from premium 304 stainless steel and produced in compliance with the DIN 976 standard. Designed for applications requiring continuous thread engagement and reliable load-bearing performance, this thread bar delivers excellent mechanical strength, corrosion resistance, and installation flexibility.
With a strength class of A2-70, the SS thread bar is engineered to withstand high tensile loads and sustained stress without deformation. Its full-thread design ensures uniform grip and secure fastening when paired with nuts, washers, and other stainless steel fasteners. This makes it an essential component in construction, engineering, suspension systems, anchoring, and general industrial applications.
Features & Benefits
- High Corrosion Resistance: Made from 304 stainless steel, our thread bar is highly resistant to rust and oxidation, making it suitable for both indoor and outdoor applications, even in humid environments.
- Exceptional Strength: With a product strength: A2-70 rating, this SS thread bar provides superior holding power and structural integrity for demanding tasks.
- Precision Engineering: Manufactured to the DIN976 standard, the threads are deep and uniform, ensuring a tight, secure fit and preventing slippage or locking.
- Full Thread Design: The thread bar features continuous threading along its entire length. This uniform thread ensures better load distribution, stronger connections, and greater flexibility for various installation configurations.
Specification
|
Thread diameter |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
|
Screw pitch |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
|
Thread diameter |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
|
Screw pitch |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
FAQ:
Q1: What is the difference between DIN975 and DIN976 for an SS Thread Bar?
A: While both refer to threaded rods, DIN976 specifically refers to shorter, fixed-length threaded studs or rods used in structural applications, whereas DIN975 traditionally referred to 1-meter or 2-meter lengths. Our products meet the precision thread requirements of the DIN976 standard.
Q2: Why is the A2-70 rating important for fasteners?
A: The A2-70 rating indicates that the stainless steel thread bar has a minimum tensile strength of 700 MPa. This high-strength rating ensures the stick can handle heavy mechanical loads without snapping or stripping threads.
Q3: What is an SS Thread Bar used for?
An SS thread bar is used for suspension, anchoring, connecting, and structural fastening where a strong, continuously threaded rod is required.
Q4: What accessories are commonly used with this product?
The SS thread bar is typically used with stainless steel nuts, washers, and other compatible fasteners to form a complete fastening system.
